| Customization: | Available |
|---|---|
| Appearance: | Smooth |
| Application: | Agriculture, Automotive, Construction, Industrial Machinery, Marine, Mining, Industrial Lubricant, Automotive Lubricant |
|
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Technical Specifications of
Sustainable Lubricants for Long-Term CV Joint Wear and Protection
CV Joint Grease is enhanced by the addition of highly micronised molybdenum disulphide for use in constant velocity joints in the automotive and industrial sectors. The optimised blend of solvent refined mineral oils are highly compatible with the rubber boots commonly used in CV joints. It is also suitable for anti-friction and plain bearings subjected to high load, shock load and vibrating conditions.
Excellent resistance to high and low temperature, extreme pressure , corrosion, mechanical stability, and elastomer compatibility.
Applicable between -40ºC to +160ºC.
This is specialized grease for inner joint, suitable for lubrication and sealing of various cars, also applicable for lubrication and sealing of friction parts like rolling bearing for imported facilities, the quality has reached the leading position.
|
Item
|
Unit
|
Typical Values
|
Test Method
|
|
Appearance
|
--
|
Smooth ointment
|
|
|
Worked cone penetration
|
0.1mm
|
290
|
GB/T 269
|
|
Dropping Point
|
ºC ≥
|
270
|
GB/T 3498
|
|
Oxidation stability
|
(99ºC,100h, 0.76MPa)
|
0.07
|
SH/T 0325
|
|
Corrosion
|
(T2 sheet copper, 100ºC, 24h) ≤
|
No green or black change
|
GB/T 7326
|
|
Oil separation by steel mesh
|
100ºC, 24h % ≤
|
3
|
SH/T 0324
|
|
Evaporation
|
(99ºC, 24h) % ≤
|
1.8
|
GB/T 7325
|
|
Low Temperature Torque
|
(-35ºC), N·M
Starting Torque ≤
Running Torque ≤ |
0.250 |
SH/T 0338
|
|
Extreme Pressure (EP) Four-ball test
|
PB N
PD N |
735
2450 |
GB/T 3142
|
-40ºC~+160ºC.
1. Position the grease in a ventilated, favorable temperature room. Protected it from dust and impurities after open, close the drum lid after using.
2. Cleaning the parts of lubrication before using, don't mix using with other grease. If there is a little oil impregnate, blend it before using.
){kind=link}